Pressure Reducing Valve

Type of Pressure Reducing Valves

  • Water Pressure Reducing Valve
  • Steam Pressure Reducing Valve
  • Hydraulic Pressure Reducing Valve

Water Pressure Reducing Valve

  • Size Range: DN15 - DN100
  • Class Range: 150#, 300#, PN10, PN16
  • Design Standard: ASSE 1003, CSA B356, IAPMO
  • End Connection: Flange / Thread
  • Water Pressure Reducing Valve Manufacturer

It is designed for multi-story buildings to supply the equal flow and pressure in every bock/home. The water pressure reducing valve regulate the water pressure from the high-pressure waterline. Mart Valves designs this valve to reduce water pressure to safe and low levels before the water gets into the plumbing fixture in the building. A high-water pressure cannot be used in home for the routine life. So,the water pressure reducing valve helps to control the water pressure. The supply of municipal water is mostly pumped at high pressure of 150 to 200 psi. Such high pressure into home plumbing fixtures can strain them and soon start causing fail on joints and faucets to leak as well as breaking other appliances. As such, a water pressure-reducing valve will help to protect home pipes and other plumbing fixtures, home appliances such as dishwashers and clothe washers in the house.

Steam Pressure Reducing Valve

  • Size Range: 2"-12"
  • Class Range: ANSI 150# / 300# /600# /PN16/ PN40/PN60
  • Design Standard: ASME B16.34; DIN 3202
  • End Connection: Flanged
  • Steam Pressure Reducing Valve Manufacturer

It is an automatic control valve used to control the high-pressure steam. It reduces high pressure to constant outlet pressure. The steam pressure-reducing valve is used in plenty of steam applications to control flow of steam. It provides the correct level of steam pressure in pipeline. One gets desired pressure at outlet from the steam pressure reducing valves. It is serves in many areas such as testing fixtures, oil lines, autoclaves, single radiators, steam irons, and vulcanizers. Thus, we can say that a steam pressure reducing valve is an automatic valve used to ensure there is no excess pressure in a system.

Hydraulic Pressure Reducing Valve

  • Size Range: 2" - 32"
  • Class Range: ANSI 150LB/ 300LB/600LB/PN16/ PN40/PN60
  • Design Standard: ASME B16.34; DIN 3202
  • End Connection: Flanged
  • Hydraulic Pressure Reducing Valve Manufacturer

The Hydraulic Pressure Reducing Valve as name suggest, it works with fluid pressure which is passing through inside it. It works upon the pressure differential method. This valve reduces high fluid pressure to steady and serviceable pressure. There is diaphragm that interconnected with compression spring and working with differential pressure. This spring is guided by washer and closer disc. Once the fluid flow inside the valve, the disc lifted upside and valve opens. The pre-set pressure via pilot can be achieved by the differential chamber. There is a special feature to control the flow and pressure. It reduces the noise level which is generated because of high fluid-flow velocities. It is called smart flow control valve with accessories connected.

The below accessories can be assembled as per system requirement.

  • PLC system
  • Limit Switch
  • Flow meter
  • Pressure sensor
  • Electric Actuator
  • Pneumatic Actuator
  • Electro-pneumatic positioner
  • Solenoid Valve
  • Safety Valve (After selection of pilot it works as a safety relief or pressure relief valves)
  • Pressure sustaining valve
  • Back pressure or pump-check valves
Copyrights © 2022. MART VALVES All Rights Reserved.